這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

Professional Service Home > Professional Service

Profession Incise

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

Thickness: 0.05 m/m - 3.0m/m, Width: 2.0 m/m - 650 m/m (Width tolerance: ± 0.05 m/m)
Accuracy meets (JIS)(ASTM)(DIN)(GB) standard

 

Bending tolerance (H/W)

H = Amount of Curvature
W = Width of strip
Width (m/m) Tolerance (Per 100 mm)
Over 6 mm to 9 mm inc 9 mm max
Over 10 mm to 13 mm inc 6 mm max
Over 14 mm to 25 mm inc 4 mm max
Over 26 mm to 50 mm inc 3 mm max
Over 51 mm to 100 mm inc 2 mm max
Over 100mm 1 mm max

Remark: This specification is compiled according to JIS Standard.

 

Professional

Physical Significance of Nature and Conductivity of all Machines
Hardness Test (Load < 1kg)

 

.Vickers Hardness (Hv0.1-0.5)

Hmv= P/A = P/(d2/2)(sin(θ/2)
= 1854.4P/d2

P= Load
A= Area of Compressed Surface
d= Mean Value of Lengths of Two Diagonal Lines
θ= Enclosed Angle of Diagonal Sides of Diamond Press Tool

180° Bending Test

.Good Way Bending

.Bad Way Bending

Φ Extension test
 

.Tensile Strength (TS. kgf/mm2)
.Yield Strength (YS. kgf/mm2)
.Elongation (EL%)

 

Advantage Supplier

For the maximum advantage of the connector

Division I provide continuous production of advanced equipment, processes can be high-speed punch press production terminals to play to the highest pole.
The supply of raw materials from start to last uninterrupted continuous punch production.
Substantial improvements in production quality and performance.

Step1  Use the machine-specific mold to cut the two sections to 75 degrees during the butting process.

Step2  After being trimly cut, the machine will execute the butt-joining of these two sections automatically.

Step3  The final step is the well-trimmed smooth joining result.

High-speed non-stop production